Certified technicians, professional drying equipment and moisture readings you can see for yourself. No guesswork.
The sooner drying starts, the less there is to repair. Our phones are answered around the clock, with same-day visits when available.
You get a straight answer on cost up front, with every line explained and nothing hidden.
You do not have to work out how bad it is on your own. Call, tell us what you see, and a Huntington Beach technician will explain the next step and what it should cost.
Water reaches an attic from two directions. From above, rain enters through failed flashing, worn shingles, or the seals at chimneys and vents. From below, household moisture rises and condenses on the cold roof sheathing if attic ventilation is poor. Either way, hardly anyone goes up there to look. Our team in Huntington Beach inspects the attic, finds the source, and dries it out.
On the typical attic job, soaked insulation is the main issue. Once wet, both cellulose and fiberglass lose R-value, and heating and cooling the home costs more. Even worse, it keeps water pressed against the framing and the ceiling drywall for weeks. We remove what is saturated, dry the wood with air movers and dehumidifiers, and treat any mold on the rafters or sheathing.
Our inspection covers the flashing points, roof deck, exhaust ducts and vents, and tells us if the water is condensation, a leak, or both. Its full reach is mapped with a thermal camera and meter readings.
Saturated or moldy insulation is bagged and removed so the wood and drywall under it can dry. We protect the living space below and keep the access path contained.
Air movers and dehumidifiers bring the rafters, joists and sheathing back to normal moisture levels. Visible mold is cleaned from the wood and an antimicrobial is applied.
We point out the roof or ventilation problem that needs correcting and can share our findings with your roofer. When the attic has stayed dry, the R-value is restored with new insulation.
We save what can be dried properly and remove only what cannot. Moisture readings make that call, not guesswork.
Ask a Tech: (475) 203-3930| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Recessed lights and wiring | No corrosion or moisture found during an electrician's inspection | The housing took in water, or its connections have corroded |
| Roof sheathing | Only stained, still firm, and reading normal once it has dried | Layers coming apart, soft spots, or a sag between the rafters |
| Fiberglass insulation | Quick drying of a small area that took clean rainwater | Wet longer than a few days, or dirty, moldy or matted |
| Ceiling drywall | Flat and dry, with a stain that sealing and repainting will cover | It spent weeks under soaked insulation, or it sags or crumbles |
| Cellulose insulation | Still loose, with dampness limited to the surface | Packed or soaked to the bottom, the usual result |
Attics hold junction boxes, recessed light housings and cable runs. When they get wet there is a risk of shock and fire, so keep out until the power has been checked.
Every day, a fan duct that stops short of the roof releases humid bathroom air into the attic. That moisture condenses on the cold sheathing and looks just like a roof leak.
Many attics hold an air handler, a drain pan and condensate lines. For weeks an overflowing pan or blocked drain can drip into insulation, and there is no storm to tip you off.
Poorly ventilated attics often grow mold across the underside of the sheathing. It can cover a wide area before anyone goes up to look.
Rain that makes it through the roof falls into the insulation and is absorbed. With no sign inside the house, nobody notices the leak and the roof stays unrepaired.
In a still, warm attic, paper facing and wood that stay damp give mold ideal conditions. It can start on the back side of the ceiling drywall and on the sheathing.
Once storm after storm has saturated the insulation, the ceiling starts getting wet. In the room underneath, brown rings show up and the drywall may begin sagging.
Sheathing delaminates and loses its hold on the roofing nails. Large areas of roof decking are covered in mold, while rafters that never dry begin to decay.
Not seeing your question? Call and ask. It costs nothing to talk it through.
Call (475) 203-3930Take action now and prevent costly damage. Huntington Beach Restoration is ready to help.
Call (475) 203-3930 Now